Cisco WS-C3560-48PS-S Software Configuration Manual page 587

Chapter 28 Configuring QoS
Table 28-15 Commands for Displaying Standard QoS Information (continued)
Command
show mls qos queue-set [qset-id]
show policy-map [policy-map-name [class
class-map-name]]
78-16156-01
Purpose
Display QoS settings for the egress queues.
Display QoS policy maps, which define classification criteria for
incoming traffic.
Do not use the show policy-map interface privileged
Note
EXEC command to display classification information
for incoming traffic. The interface keyword is not
supported, and the statistics shown in the display should
be ignored.
Catalyst 3560 Switch Software Configuration Guide
Displaying Standard QoS Information
28-65