Topology View - Cisco WS-C3560-48PS-S Software Configuration Manual

Chapter 3 Getting Started with CMS
Note Figure 3-7
for a list of switches that can be members of a cluster with a Catalyst 3560 switch as the command
switch.
Note On Catalyst 1900 and Catalyst 2820 switches, CMS is referred to as Device Manager (also referred to
as Switch Manager). Device Manager is for configuring an individual switch. When you select Device
Manager for a specific switch in the cluster, you launch a separate CMS session. The Device Manager
interface can vary among the Catalyst switch platforms.

Topology View

When CMS is launched from a command switch, the Topology view appears by default. (This view is
available only when CMS is launched from a command switch.)
When you click the topology button on the tool bar, the Topology view displays the command switch
(indicated by the *CMD* label) and the devices that are connected to it, as shown in
right-click on a switch or link icon to display a menu for that icon.
Figure 3-8
1
2
78-16156-01
shows a cluster with a Catalyst 3550 switch as the command switch. Refer to the release notes
Topology View and Device Popup Menus
1
Link popup menu
Command switch
2 3
3 Command switch popup menu
4
Cluster member popup menu
Catalyst 3560 Switch Software Configuration Guide
Displaying CMS
Figure 3-8. You can
4
3-15