Expert Mode; Wizards - Cisco WS-C3560-48PS-S Software Configuration Manual

Understanding CMS
Figure 3-3
1
2
1
Guide mode is not available if your switch access level is read-only. For more information about the
read-only access mode, see the

Expert Mode

Expert mode is for users who prefer to display all the parameter fields of a feature in a single
CMS window. You can view information about the parameter fields by clicking the Help button.
If you select Expert Mode but you want to use Guide Mode instead, you must click Guide before
selecting an option from the menu bar, tool bar, or popup menu. If you change the interaction mode after
selecting a configuration option, the mode change does not take effect until you select another
configuration option.

Wizards

Similar to guide mode, wizards provide a step-by-step approach for completing a specific configuration
task. Unlike guide mode, a wizard does not prompt you to provide information for all of the feature
options. Instead, it prompts you to provide minimal information and then uses the default settings of the
remaining options to set up default configurations.
When you select a feature that has Wizard in the name, the wizard launches for that feature, as shown in
Figure 3-3 on page
Wizards are not available for all features or for read-only access levels. For more information about the
read-only access mode, see the
Catalyst 3560 Switch Software Configuration Guide
3-6
Guide Mode and Wizards
2
Guide mode icon
3-6.
Wizards
"Privilege Levels" section on page
"Privilege Levels" section on page
Chapter 3 Getting Started with CMS
3-7.
3-7.
78-16156-01