Function And Use; Configuration - 2N IP Style Installation Manual

3. Function and Use

This section describes the basic and extending functions of the 2N
Here is what you can find in this section:
•

3.1 Configuration

• 3.2 2N® IP Style User Control
• 3.3 Intercom Control as Viewed by Internal User
• 3.4 Maintenance
• 3.5 Downloads
3.1 Configuration
Configuration takes place typically via a web interface. Alternatively, configuration is possible
®
using the 2N Access Commander software or the My2N service.
®
Configure 2N IP Style using your PC equipped with any Internet browser:
• Launch your Internet browser (Chrome, Firefox, Internet Explorer, etc.).
• Enter the IP address of your intercom (http://192.168.1.100/, e.g.).
• Log in using the username Admin and password 2n.
You have to know the IP address of your device to log in to the integrated web server. Upon
®
purchase, 2N IP Style is set to the dynamic IP address mode – it retrieves the IP address
automatically if there is a properly configured DHCP server in the LAN. If no DHCP is available,
®
2N IP Style can be operated in the static IP address mode. Refer to the
for 2N IP Intercoms
If your device remains inaccessible (you have forgotten the IP address or the LAN configuration
has changed, for example), change the LAN settings using the hidden menu on the device.
Hidden Menu Launch
Wait until the end of the introductory animation on the display after starting/restarting the
device. The moment the home screen appears (after approx. 20 s), place your finger in the left-
hand upper corner of the
®
for the 2N IP Style configuration details.
display for approx. 5 s.
Installation Manual 2N® IP Style
®
IP Style product.
Configuration Manual
69 / 90