Advertisement
Installation Manual 2N® IP Style
Rain Test Mode
The rain test
mode shows where the presence of water has been detected on the display. Once
the mode is activated, a black screen is displayed showing the water contact spots. Tap quickly
three times on any display spot to delete the impact records.
®
2N
IP Style does not support the intercom functions (e.g. calls cannot be made, cards cannot
be read on the device) during the test. Restart the device to quit the rain test mode and return to
the standard mode.
Device Restart
To restart the device, disconnect the device from the power supply or use the web interface in
the System / Maintenance section. No configuration change appears after the restart.
Caution
•
Do not touch the display during restart, it is being calibrated.
Factory Default Reset
Located among the main unit connectors, the CONTROL button helps you reset the factory
default values.
Follow the instructions below to reset the factory default values:
•
Disconnect the device from the power supply.
71 / 90
Advertisement
Need help?
Do you have a question about the IP Style and is the answer not in the manual?
Questions and answers