Incoming Call Answering/Rejecting - 2N IP Style Installation Manual

Hide thumbs Also See for IP Style:

Name List

Virtual Number Call

If the Phone function enabled (refer to Subs.

Intercoms) parameter is selected, you can dial a user-defined phone number using the 2N

Style numeric keypad.

Procedure:

Press the

Enter the phone number using the numeric keypad and repress the

confirmation.

Press the

Incoming Call Answering/Rejecting

If the automatic incoming call answering function is disabled (refer to Subs.

Configuration Manual for IP Intercoms), any incoming call to 2N

ringing. Push the

Door Opening (Switch Activation) by RFID Card

IP Style is equipped with a door unlocking switch. To activate this switch, tap a valid card or

chip on the integrated card reader. Remember to complete the user access card ID (refer to

Subs. 5.2.1 Users

of the Configuration Manual for IP intercoms) to get an RFID card / chip access.

button.

red button any time to end the call.

button to answer the call and the

Installation Manual 2N® IP Style

5.4.1

Phone of the Configuration Manual for IP

IP Style is signaled with loud

button to reject the call.

Cards

green button for

5.4.1 Phone

77 / 90

of the

Table of Contents

Do you have a question about the IP Style and is the answer not in the manual?