Advertisement
Caution
•
We recommend the use of a LAN surge protection.
•
We recommend that an SSTP Ethernet cable with a shielded RJ-45 connector is
used, which is connected to the switch (with the grounding option) using the same
shielded connector. Thus, the device is grounded without the need to use
grounding terminals.
Tip
•
Remove the protective connector cover to facilitate the threading of the UTP/STP
cable RJ terminal into the device box.
Warning
•
This product cannot be connected directly to the telecommunications lines (or
public wireless LANs) of any telecommunication carriers (e.g. mobile
communications carriers, fixed communications carriers, or internet providers). In
the case of connecting this product to the Internet, be sure to connect it via a
router.
Main Unit Connectors
Installation Manual 2N® IP Style
51 / 90
Advertisement
Need help?
Do you have a question about the IP Style and is the answer not in the manual?