Maintenance - Daikin PE-ADDA200 Service And Installation Manual

8 Maintenance

The maintenance of the product includes the interventions (inspection, verification, control, adjustment and
replacement) that are necessary following normal use.
For a good maintenance:

Use only original spare parts; use tools suitable for the purpose and in good condition.

Comply with the intervention frequencies indicated in the manual for scheduled maintenance (preventive
and periodic). The time interval between one intervention and the other is to be understood as maximum
acceptable; therefore, it must not be exceeded; it can be abbreviated instead.

Good preventive maintenance requires constant attention and continuous monitoring of the product to
promptly verify the cause of any anomaly such as excessive noise, overheating, etc. .... and remedy them.
Removing any cause of anomaly or malfunction avoids further damage to the equipment and ensures operator
safety.
The staff in charge of maintenance and cleaning of the product must be well trained and must have a thorough
background knowledge of accident prevention regulations.
Cleaning activities must be carried out during maintenance only and once the product has been deenergized.
Unauthorized personnel must remain outside the working area during all maintenance and cleaning operations.
Maintenance operations are divided into two main categories:
Scheduled maintenance
Corrective maintenance
Daikin Applied Europe S.p.A
SERVICE and INSTALLATION MANUAL
Compressor Inverter PE-ADDA200
Any maintenance performed in a preventive manner to guarantee the proper
functioning of the product over time including inspection, control,
adjustment and cleaning.
Any maintenance performed after failure detection including repair,
restoration of nominal or working conditions, replacement of a faulty,
defective or worn unit.
Page 26 of 51
Rev. 0.3