Start A Project - Daikin PE-ADDA200 Service And Installation Manual

9.1.3

Start a project

There are three different ways to start a project:

Selecting one of the last projects opened it in the upper part of the window

Add a new project in the middle part of the window. In this case after that it is also necessary to select
the application file from the catalogue. This option is useful especially whit a new project

Using network scan to find out the devices connected. This is the easiest way to start a project. Click on
the "Advanced" button to show the scan parameters:
Set the correct COM port and start the scan by clicking on the "Scan"button.
Daikin Applied Europe S.p.A
SERVICE and INSTALLATION MANUAL
Compressor Inverter PE-ADDA200
Fig. 18
Fig. 19
Page 32 of 51
Rev. 0.3