Download Print this page

Vfd Control; Vfdnav - Daikin PE-ADDA200 Service And Installation Manual

Compressor inverter

Advertisement

9

VFD CONTROL

In standard Modbus control, the VFD will be controlled exclusively via serial communication with the following
exceptions:
Start/Stop command is given through a digital hard-wired contact
High Pressure Switch will be wired directly to the STO digital input

9.1 VFDNav

The following procedure requires VFDNav Software to be installed on the PC.
To install VFDNav Software on the pc, run the last setup file (e.g. "SetupDaikin_0.0.0.12_20190509.exe" ).
Minimum system Requirements:
Operative System
• Windows 7 Home Premium 32 Bit & 64 Bit
• Windows 7 Professional 32 Bit & 64 Bit
• Windows 7 Ultimate 32 Bit & 64 Bit
• Windows 8 / 8.1 64 Bit
• Windows 10 64 Bit
Hardware requirements
• Processor Pentium 1.6 GHz or greater
• RAM Memory 1 GB; 2 GB preferred
• Hard Disk 500 MB of free space
Software requirements
• Internet explorer 9; 11 preferred
Daikin Applied Europe S.p.A
SERVICE and INSTALLATION MANUAL
Compressor Inverter PE-ADDA200
Page 29 of 51
Rev. 0.3

Advertisement

loading
Need help?

Need help?

Do you have a question about the PE-ADDA200 and is the answer not in the manual?

Subscribe to Our Youtube Channel