Set Mode Operation - Icom IC-756 Instruction Manual

__
Mm 8 SETmMOoDE
E Set mode description
Set mode is used for programming infrequently
changed values or conditions of functions. This trans-
ceiver has a level set mode, display set mode, timer
set mode and miscellaneous (others) set mode.
e Set mode operation
© If the start up screen is not selected (if [F-5]'s func-
tion is [EXIT]), push [F-5] one or more times to exit.
(2) Push [(F-5)SET] to select the set mode screen.
@ Push [(F-1)LEVEL], [(F-2)DISP], [(F-3)TIME] or
[(F-4) OTHERS] to enter the desired set mode.
@ Push [(F-1)4] or [(F-2)W] to select the desired item.
®© Set the desired condition using the tuning dial.
- Push [(F-3) DEF] to select a default condition or value.
© For timer set mode, push [(F-4)SET] to enter the set
time.
@ Push [(F-5)EXIT] twice to exit the set mode.
eStart up screen
c52 ek /T\ {2:34
% 14.195.00
1x i4. 100.00 USB nib izre SET J u m
eLevel set mode (p. 54)
USB
14.205.00 TF
Hib ma LDISPLAV SET]
om saga A Do
COMP
OFF
®% 14.195.00
ix 14. 1090.00 USB
USB Hib me (TIMER SET]
UFO Udy Ee eT rem
14.205.00
— ix 14.190.900 USB
Mm mc SET MODE] TONE
LEVEL GFF
DISPLAY
= TIME & TIMER
meal oTHERS
ta AEE itr marker
Filter GET
Ccon imation
Beep Cban
CAnF Scan sPe eed
= Sga Ua RF oL c control
Quick dualwatch