Icom IC-756 Instruction Manual page 62

8 SET MODE
E Miscellaneous (others) set mode (continued)
Senha gurina bs
The spectrum scope shows the transmit signal wave-
form while transmitting. This can be deactivated if de-
sired.
When "OFF" is selected, the spectrum scope holds
the received waveform while transmitting and does
not show the transmit waveform.
sPeech Sunthesizer
When the optional UT-102 VOICE SYNTHESIZER UNIT is
installed, you can select between English and Japan-
ese as the language.
See p. 61 for unit installation.
mPa, Sheed
When the optional UT-102 VOICE SYNTHESIZER UNIT is
installed, you can select between faster or slower syn-
thesizer output.
See p. 61 for unit installation.
Speech So Lew |
When the optional UT-102 VOICE SYNTHESIZER UNIT is
installed, you can have frequency, mode and signal
level announcement. Signal level announcement can
be deactivated if desired.
When "OFF" is selected, the signal level is not an-
nounced.
See p. 61 for unit installation.
Memo Pad numbers
This item sets the number of memo pad channels
available. 5 or 10 memo pads can be set.
Mic ubedowrn Sheed
This item sets the rate at which frequencies are
scanned when the microphone [UP]/[DN] switches
are pushed and held. High or low can be selected.
OH
Spectrum scope displays
the transmit waveform
(default)
En9lish
English announcement
(default)
HIGH
Faster announcement
(default)
OW
Signal level announcement
(default)
S
5 memo pads
(default)
HIGH
High speed (default,
50 tuning steps/sec.)
OFF
Spectrum scope does
not display the transmit
waveform
JaPanese
Japanese announcement
LOW
Slower announcement
OFF
No signal level
announcement
16
10 memo pads
LOW
Low speed
(25 tuning steps/sec.)