Clock And Timers; Timer Operation - Icom IC-756 Instruction Manual

E Setting power-off period
The transceiver can be set to turn OFF automatically
after being activated via the power-on timer. The
power-off period can be set to 5-120 min. in 5 min.
steps.
© If the start up screen is not selected (if [F-5]'s func-
tion is [EXIT]), push [F-5] one or more times to exit.
(2) Push [(F-5)SET] then [(F-3) TIME] to enter timer set
mode.
(3) Push [(F-1)] or [(F-2)W] to select the power-off pe-
riod item.
am (TIMER SETI
Time now).
Power—-ON er
COMP
CFF
@ Timer operation
@ Preset the power-on time and power-off period as
described previously.
© Push [POWER] momentarily to turn the timer func-
tion ON.
- The [POWER] light lights when the timer function is
ON.
[POWER]
QO
O
=)
=)
QO
Q
(m
G) Push [POWER] for 2 sec. to turn the power OFF.
- The [POWER] light lights continuously.
CLOCK AND TIMERS /
@ Set the desired power-off periods using the tuning
dial.
- "TIMER -set push [SET]" blinks.
Sh me (TIMER SETI
pine Ban? i
TEENEI
TNF = 3 ! f mg
OFF I TIMER-set Push CSET] Z
- z ` =
©) Push [(F-4)SET] to enter the set time.
- Push [(F-5)EXIT] to cancel the setting.
© Push [(F-5)EXIT] twice to exit timer set mode.
@ When the set time arrives, the power is automati-
cally turned ON.
©) The transceiver emits 10 beeps and turns OFF
after the power-off period elapses.
- The [POWER] light blinks while beeping.
- Push [POWER] momentarily to cancel the power-off
timer, if desired.
52