Icom IC-756 Instruction Manual page 53

scans 6
E Select memory scan operation
© If the start up screen is not selected (if [F-5]'s func-
© Push [(F-1)MEMORY] to start the memory scan.
tion is [EXIT]), push [F-5] one or more times to exit. - Decimal points blink while scanning.
(2) Select memory mode. @ Push {(F-3)SELECT] to start select memory scan;
@ Select the desired operating mode. push [(F-3)SELECT] again to return to memory
- The operating mode can also be changed while scan- scan, if desired.
ning. =
® Push [(F-4)SCAN] to select the scan screen.
rT >) USB
3x 14,195.00
UFO 14100.00 USB
Gz sk 2k /T\ 12134
14.195.00
UFO 14.106.060 USB
USB
"o 14.205.00
wo 14.205.00
—— ix i4. 188.08 USB
ae m C SCAN]
CAME AF SPan 5: + 1@kH2z
OFF
ce oe edges P2: 29: 399: 89MH
MAM Erooranmes li 23:393: gaz
SELECT BAFSPAN E EXIT When the scan detects a signal, the scan stops,
pauses or ignores it depending on the resume set-
© Set [RF/SQL] open or closed.
ting and the squelch condition.
- See p. 47 for scan condition.
© To cancel the scan, push [(F-1) MEMORY].
- If the [RF/SQL] control function is set as RF control, the
squelch always opens. See pgs. 2, 56 for details.
NOTE: 2 or more memory channels must be des-
ignated as select memory channels for select
4, memory scan to start.
Xs
E Setting select memory channels
(3) Push [(F-4)SCAN] to select the scan screen. map pects lor Peer MEME channe's.
Glick GEA (TL 12:34
14.195.00
VFO 14.166.8@ USB
@i2.4k G5528k /T\ 19:34
USB r
i* 14.195.00
UFO 14.180.00 USB
USB
"e 14,205.00
ix 14.199.9@ USB
ae ( SCAN]
USB
o 14,205.00
1x 14,160.80 USB
mm C SCAN]
aig 4F SPan : + 10kHz mga oF SPan
OFF : OFF a d Pl:
Scan cdses pat 29:338: 83MH
can edge
: a MH
Scan edges P2: 29, . 99MH
4%, NOTE: Select memory channels can also be set in
Y the memory channel screen. (p. 42)
7,
I
Y
50