Icom IC-756 Instruction Manual page 57

E Level set mode
Ts bone (Bases
This item adjusts the bass level of the transmit audio
tone in SSB/AM mode from —12 dB to +12 dB in 2 dB
steps.
Tx bone Treble.
This item adjusts the treble level of the transmit audio
tone in SSB/AM mode from —12 dB to +12 dB in 2 dB
steps.
Honi Lior
This item adjusts the CW side tone and transmit IF
signal monitor level from 0 % to 100 % in 1 % steps.
See p. 33 for details.
Beek
This item adjusts the volume level for confirmation
beep tones from 0 % to 100 % in 1 % steps.
% NOTE: To adjust the LCD contrast or backlight, wait
Y until the LCD becomes stable (10 min. or more after
Y turning power ON). This is an inherent characteristic
Z, of LCDs and LCD backlights and doès not indicate
Y a transceiver malfunction.
Contrast (LEDa
This item adjusts the contrast of the LCD from 0 % to
100 % in 1 % steps.
Back light CLEDO
This item adjusts the brightness of the LCD from 0 %
to 100 % in 1 % steps.
ack Light switches'
This item adjusts the brightness of the switches from
1 to 8.
SETMODE 8
eel GdB
0 dB (default)
ae BdB
0 dB (default)
m ee 507
50 % (default)
m 50
50 % (default)
m l 50
50 % (default)
m l SOX
50 % (default)
m G
Backlight level is 8. (Maximum; default)
54