Set Mode; Set Mode Operation; Set Mode Contents - Icom IC-M710 Instruction Manual

12
6
SET MODE
• Set mode operation
Set mode operation is used for programming infre-
quently changed values or conditions of functions.
The IC-M71 0 has up to 13 such items.
~
Some of the set mode items described in this
~
section are not available on some transceiver ver-
~
.
~
SIOnS.
CD
Push [POWER] to turn power OFF.
®
While pushing and holding [FUNC] and [1], turn
power ON to enter set mode.
- Set mode is selected and one of its items appears.
@ Rotate the [GROUP] selector to select the desired
item.
@ Rotate the [CHANNEL] selector to set the values
or conditions for the selected item.
@ Turn power OFF and ON again to exit set mode.
• Set mode contents
(1) FSK ITU channels
FSK ITU channels appear as a group between the
ITU 25 MHz band and user channels. This FSK
channel group can be hidden for voice communi-
cation use only.
(2) Connected antenna tuner
The transceiver has several tuner control systems
for use with an optional lcom antenna tuner. Select
the condition depending on the connected antenna
tuner.
Note that internal switch selection may be required
when using a non-lcom tuner (p. 19).
(3) Automatic tuning condition
When the optional AT-130 or AT-130E
AUTOMATIC
ANTENNA TUNER
is connected, tuning can be started
automatically without the [TUNE] switch for instant
operation.
If manual tuning is required, this automatic operation
can be deactivated.
[POWER]
F/
t - /
=/ [/
~--;--(Condition
T
:_:r.:E
f'?
Item
r ,-
CI ,- ,-
1-
T T,-,,-,
:J
.L •
,_,,...~
FSK channels do not
appear (no SITOR
operation).
~--------~~efuu~
Cl ,-1
,- T T ,-,,-,
::I.J.. I l_l(i
:=:
t -
I -1 ,-,
I
=I
!...I
T
1 111 , - ,-,
I ' - "
·•C
( i
:=:t- :c•c:
T
1 ' "
•C: , _ . - ' ) '
,_,,~··-I
I
:=: :-: -
=:
T1
lhlf:(-')
',_,,~,,_,,
c • .-.
r:ur
T
I 111 I
',_,,,,
FSK channels appear (for
SITOR operation).
AT-130
(default)
AT-120
AH-3
Tuning starts when
pushing [PTT] on a new
..____ _ _ _ _ _ _ _ _ ____, frequency.
r:ur
T
1
lh
1
I'-''''
L _ _ _ _ _ _ _ _ _ _ J
Tuning starts only when
(TUNER] is pushed.
(default)