Icom IC-756 Instruction Manual page 38

35
4 RECEIVE AND TRANSMIT
E Electronic CW keyer
The transceiver has an electronic keyer. Keying
speed can be adjusted with [KEY SPEED]. Keying
weight, the ratio of dot: space: dash, can be set from
1:1:2.8 to 1:1:4.5 in keyer set mode.
Push [F-2] to select the "Keyer type" item.
e Setting the electronic keyer
@ Push [CW] to select CW mode.
@ Rotate the tuning dial to set the electronic keyer
function to electronic keyer, bug-key or straight key
(electronic keyer OFF).
- Bug-key setting can be substituted for a bug-key while
operating with a paddle. Set for "straight" for a real bug-
a key or connect the bug-key to [KEY] on the rear panel.
[CW] switch M Push [F-2] to select the "Mic up/down keyer" item.
[KEYER] switch
@ Push [KEYER] to select keyer set mode.
ime
ash ratio
e Polarity
type
@2.4k G55)2. ek L 12:34
14.195.00
ix 14.160.06 USB
CW
"° 14.205.00
— 1x 14.100.090 USB
wa (MEMORY KEYER]I
SEND
Q Rotate the tuning dial to turn the substitute paddle
function ON or OFF.
- The up/down keys of the microphone can be substi-
tuted for a paddle. When ON is selected, they do not
function as up/down keys in all modes.
(2 Push [(F-5)EXIT] to exit keyer set mode.
EDIT
CONTACT NUMBER(@81>
CW KEYER
@ Select the "Dot/dash ratio" item using [F-1] or [F-2]. DOT
DASH (Fixed*) DASH
: Aia Weight setting:
keser Giju arana BER
1:1:3 (default)
Mic uP down keyer
Weight setting:
Adjusted
© Rotate the tuning dial to select the keying weight.
- 1:1:2.8 to 1:1:4.5 can be set.
- Check the ratio with side tone in CW mode. *SPACE and DOT length can be adjusted with [KEY
- Push [(F-3)DEF] to select a default ratio of 1: 1:3.0. SPEED] only.
© Push [F-2] to select the "Paddle polarity" item.
Ar EN KEYER SETTING]
Adjustable range SPACE (Fixed*)
ares JEN ity
Mic' up "down keser
@ Rotate the tuning dial to select the key polarity be-
tween normal and reverse polarity.