Icom IC-756 Instruction Manual page 26

23
3 FREQUENCY SETTING
E Frequency setting with the tuning dial
G2. ák Æ 13334
(T33) USB
™ 15.100.00
21.925.06 USB
below.)
@l2.4k @55)2.8k /T\ 12:34
21 .200.00
1 21.025.06 USB
@) Rotate the tuning dial to set the desired frequency.
- For quick tuning, use the quick tuning step function. (p.
@ Rotate the tuning dial to set the desired frequency. 24)
@l2.4k G5528k /T\ {2:34
@2 ák G2 Sk /T\ 12134
USB USB
"2 1.295.00 "e 9.780.00
1 21.025.009 USB 1 "21.025.090 USB
@) Select the desired operating mode with the mode @) Select the desired operating mode with the mode
switch. (p. 25) switch. (p. 25)
% NOTE: If the dial lock function is activated, the lock indicator lights and the tuning dial
Z does not function. In this case, push [LOCK] to deactivate the lock function.
SS
TRIPLE BAND STACKING REGISTER [EXAMPLE]
The triple band stacking register provides 3 memories
in one band. 3 sets of a frequency and mode on each
band are automatically stored when used.
If a band key is pushed once, the last used frequency
and mode are called up. When the key is pushed
again, another stored frequency and mode are called
up.
21.295.00
This function is convenient when you operate 3
modes on one band. For example, one register is f ™51.090.00
used for a CW frequency, another for an SSB fre-
quency and the other one for an RTTY frequency.
E Direct frequency entry with the keypad
The transceiver has a keypad for direct frequency [EXAMPLE]
entry as described below. 14.025 MHz
21.280 > 21.245 FP) C JC2 JC4 JCS JCEnT)