Icom IC-756 Instruction Manual page 48

45
5 MEMORY OPERATION
E Memory names
tagged with alphanumeric names of up to 10 charac- - A cursor appears and blinks.
ters each. - Memory channel names of blank channels cannot be
edited.
Letters (capitals), numerals, some symbols (/, ?, *)
and spaces can be used.
"> 14.195.00
lx 14.166.98 U5B
e Editing (programming) memory names Character
USB
© If the start up screen is not selected (if [F-5]'s func- keys mm FO 614.205.0000
tion is [EXIT]), push [F-5] one or more times to exit. 1x 14,168.98 USB
@ Push [(F-3) MEMORY] to select the memory chan- MAME 36) nE cree
nel screen. >
* 14.195.00
in 14.108.809 USB
©) Input the desired character by pushing the charac-
wo 74. 205.00 ter keys (as shown above) one or more times or
ix 14.10.80 USB by pushing the band key for number input.
Mea ae eae - Push [(F-1)4] or [(F-2)] for cursor movement.
-0.599.989 LSB - Push [(F-3)DEL] to delete the selected character.
=F EPRA - Push [(F-4)SPACE] to input a space.
sas e
se E
© Push [(F-5)EXIT] to input the set the name.
- The cursor disappears.
@ Repeat steps © to © to program another memory
®© Select the desired desired memory channel. channel's name, if desired.
Push [(F-5)EXIT] to exit the memory channel
screen.
USB
E Memory clearing
Any unnecessary memory channels can be cleared.
The cleared memory channels become blank chan-
@ Select memory mode with [VFO/MEMO]. 2 24.960.00
(2) Select the desired memory channel with [A]}/[V]. co
@) Push [M-CL] for 2 sec. to clear the contents.
| a on ae
ere
- The programmed frequency and operating mode dis- Beep
appear.
@ To clear other memory channels, repeat steps ©
and ©
UFO 14.195.009 CW