Set Mode; Set Mode Operation; Set Mode Construction - Icom IC-440 Instruction Manual

9

SET MODE

■ Set mode
Set mode allows you to change seldom used common set-
ting for the transceiver, or individual setting for the operating
channel. In this case you can "customize" transceiver opera-
tion to suit your preferences and operating style.
Available functions may differ depending on the pre-setting
via the optional CS-440
NOTE: Set mode can be accessed via the
key operation after turning power ON with
(p. 19). In this case, "all set mode" is available.
D Set mode construction
• Squelch Level
Starting item
40
.
CLONING SOFTWARE
F
SET
• CTCSS/DTCS • Auto Power OFF
• Scan Stop Timer • Lock-out
• Roger Beep
• Scan Restart
D Set mode operation
q Push and hold
• When no key is pushed for 30 sec. the transceiver returns to
normal operation.
w Push
F
SET
e Push
item.
r Push and hold
push and hold
(Set Mode)
*Regardless of the assigned key function.
and
• Backlight • Brightness
• Time-Out Timer
(TOT) • Signal Message
• PTT Hold • Speaker
F for 2 sec. to enter Set mode.
(Set Mode)
SET
* or MONI * to select the desired item, if necessary.
T SQL
or to select the desired condition of the
for 2 sec. to turn the power OFF, or
F
for 2 sec. to exit set mode.
(Set Mode)
SET
• Contrast • Beep
• Mic Gain • Beep level
• Own ID
F
: Push
SET
MONI
: Push
T SQL