Icom IC-756 Instruction Manual page 63

E Miscellaneous (others) set mode (continued)
ge oS E occa oy T i. Gs002 ET ee
he deii DALO TALE
This item sets the data transfer rate. 300, 1200, 4800,
9600, 19200 bps and "AUTO" are available.
When "AUTO" is selected, the baud rate is automati-
cally set according to the connected controller or re-
mote controller.
To distinguish equipment, each CI-V transceiver has
its own Icom standard address in hexadecimal code.
The IC-756's address is 50h.
When 2 or more |IC-756's are connected to an op-
tional CT-17 Ci-v LEVEL CONVERTER, rotate the tuning
dial to select a different address for each IC-756 in
the range 01h to 7Fh.
CI- transece i ve
Transceive operation is possible with the IC-756 con-
nected to other Icom HF transceivers or receivers.
When "ON" is selected, changing the frequency, op-
erating mode, etc. on the IC-756 automatically
changes those of connected transceivers (or re-
ceivers) and vice versa.
min with Iker
When connecting the IC-756 to the IC-735 for trans-
ceive operation, you must change the operating fre-
quency data length to 4 bytes.
e This item must be set to "ON" only when operating trans-
ceiver with the IC-735.
AUTO
Auto baud rate
(default)
c
28h
Address of 50h
(default)
ON
Transceive ON
(default)
OFF
5 bytes of frequency data
(default)
SETMODE 8
19268
19200 bps
TFh
Address of 7Fh
OFF
Transceive OFF
ON
4 bytes of frequency data
60