Icom IC-756 Instruction Manual page 60

57
rr SPLib offset (HFG
mode only and is used to input the repeater offset for
an HF band.
The offset frequency can be set from —4 MHz to +4
MHz in 1 kHz steps.
rh aPlit offset (gapi
mode only and is used to input the repeater offset for
the 50 MHz band.
The offset frequency can be set from —4 MHz to +4
MHz in 1 kHz steps.
FM subaudib le borne
This item selects a subaudible tone for FM-T mode
e Available subaudible tones
(Unit: Hz)
38. SHz 254. 1Hz
88.5 Hz subaudible tone 254.1 Hz subaudible tone
(default)
SPLiL Look
When this item is ON the tuning dial can be used to ON OFF
adjust the transmit frequency while pushing [XFC] Split lock function ON Split lock function OFF
even while the lock function is activated.
(default)
See p. 31 for split frequency operation details.
Tuner (auto stariti
The internal antenna tuner has an automatic start ca- ON OFF
pability which starts tuning if the SWR is higher than Automatic tuner start Automatic tuner start
1.5-3 in the HF bands. ON OFF (default)
When "OFF" is selected, the tuner remains OFF even
when the SWR is poor (1.5-3). When "ON" is se-
lected, automatic tune starts even when the tuner is
turned OFF.