Champion Model 44 Installation And Service Manual page 38

Mechanical • Basic Service
Mechanical Service • Replace Electric Booster Control Thermostat
1. You will need a permanent marker such as a SHARPIE® or comparable in order
to mark the control thermostat capillary tube.
2. Do not crimp the thermostat capillary tube.
3. The ferrule cannot be repositioned after the gland nut has compressed the ferrule
on the capillary tube.
4. The control thermostat fitting is located on the left underside of the booster tank
when viewing the booster tank from the front.
30
WARNING !
ELECTRIC SHOCK may cause INJURY OR
DEATH.
DO NOT WORK ON AN ENERGIzED CIRCUIT.
Turn off the main power service disconnect switch.
Attach a label to the breaker indicating that work is being
made on the electrical circuit.
NOTE !
READ ALL OF THE THERMOSTAT INSTRUCTIONS
BEFORE YOU REPLACE THE CONTROL THERMOSTAT
USED IN AN ELECTRIC BOOSTER HEATER.
IMPROPER INSTALLATION CAN CAUSE FINAL RINSE
TEMPERATURE PROBLEMS.