Champion Model 44 Installation And Service Manual page 25

E-series rack conveyor dishwasher
Hide thumbs Also See for Model 44:
Table of Contents

Advertisement

• Weekly
1. Inspect all water lines for leaks and tighten at joints if required.
2. Clean any detergent residue from the exterior of the machine.
3. Check that the drain/overflow pipes seat tightly in their drains.
4. Clean any accumulated scale from the heating element.
5. Inspect the sprayarms for any damage or missing parts.
6. Inspect the final rinse arms for missing parts.
7. Inspect the pawl bar and drive assembly for damage or missing parts.
8. Check that float switches move freely.
9. Check the idle pump actuator and the final rinse actuator for freedom of
travel.
The word SCALE refers to the mineral deposits that form as a white film inside and
sometimes outside the dishwasher. If allowed to build-up, scale can significantly
reduce the performance and life-span of a dishwasher.
Scale must be removed using strong chemicals (deliming agents) that are supplied
by a qualified chemical supplier. Your supplier will explain the safety procedures you
must follow to prevent personal injury and possible damage to the dishwasher.
Deliming agents vary in compostion and strength so it is impossible for Champion
to provide detailed instructions for the large number of products on the market;
therefore, Champion strongly recommends that you do not use any deliming
agent without the proper training.
WARNING:
Death or injury can result from toxic fume when deliming agents
come in contact with Chlorine Bleach, or other chemicals that contain
iodine, bromine, or flourine. clothing as instructed by a qualified
chemical supplier.
USE EXTREME CAUTION WHEN HANDLING ANY DELIMING AGENT
CAUTION:
Deliming agents can cause chemical burns.
Wear rubber gloves, eye protection and any other protective
clothing as instructed by a qualified chemical supplier.
Maintenance
Cleaning
Deliming
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents