Changing The Embroidery Foot; Feed Dog Adjustment - Brother PC-8200 User Manual

Changing the embroidery foot

Feed dog adjustment

30
5
4. Raise the presser foot lever to the highest position. While
pressing the black button to the left of the embroidery foot
"Q", push embroidery foot "Q" upward with both hands as far
as it will go to install it.
CAUTION
Be careful not to touch the needle during this time,
otherwise injury may result.
5
1. Raise the presser foot lever to the highest position. While
pressing the black button to the left of embroidery foot "Q",
pull embroidery foot "Q" downward to remove it.
5
2. While pressing the black button to the left of the presser foot
holder, push the presser foot holder upward with both hands
as far as it will go to install it.
CAUTION
Be careful not to touch the needle during this time,
otherwise injury may result.
With the accessory compartment off the machine, the feed dog
adjustment lever can be seen on the base of the sewing
machine. Sliding the lever to the right will lower the feed dogs.
Feed dogs are lowered during button sewing as well.
If you are continuing to sew, slide the lever to the left and the
feed dogs will raise.
* When the embroidery unit is on to the machine, the feed
dogs drop automatically.