Buttons That Do Not Fit Into The Guide Plate (Odd-Shaped Buttons); Changing The Stitch Length; Changing The Stitch Width - Brother PC-8200 User Manual

Buttons that do not fit into the guide plate (Odd-shaped buttons)

1
4
2

Changing the stitch length

3 2

Changing the stitch width

2
3
5
6
Touch the "
the stitch length.
1 "
1
2 Normal length 0.4 mm (1/64")
3 "
* If the fabric will not feed (for instance, because it is too
thick), touch the "
the stitch length.
Touch the "
the stitch width.
1 "AUTO" width 5.0 mm (3/16")
1
2 "
Measure the button diameter + thickness to set
the plate.
Example: For a button with a diameter of 1.5
cm (9/16") and a thickness of 1 cm
(3/8"), the scale should be set at 2.5
cm (1")
1 Thickness [1 cm (3/8")]
2 Diameter [1.5 cm (9/16")]
3 Button holder plate
4 Scale
5 Diameter + thickness [2.5 cm (1")]
[0.5 cm (3/16") in one scale.]
6 0.5 cm (3/16")
" and " " stitch length setting keys to adjust
": Longer
": Shorter
" stitch length setting key to increase
" and " " stitch width setting keys to adjust
" : Narrower
53