Satin Stitches - Brother PC-8200 User Manual

SATIN STITCHES

1
2
3
4
5
1. Touch the "CHARACTER/DECORATIVE STITCH" key.
The different types of patterns available will be displayed.
2. Touch the "
The satin stitch selection screen will be displayed.
* The thread may easily become knotted when certain types
of fabric or thread; therefore, the feed should be adjusted
according to the application.
1 Pattern selection keys
A
2 Touch this key to adjust the stitch width and stitch length
settings.
0
3 Touch this key to change the thread tension.
9
4 Touch this key to save a pattern combination to memory.
(Refer to page 94.)
5 Touch this key to select single or repeat sewing. (Refer to
page 89.)
6 Touch this key if you would like to change the pattern length
without changing the stitch width or stitch length settings.
(Refer to page 90.)
7 8
6
7 Touch this key to move the pattern up by about half of it's
finished height when sewing. (Refer to page 92.)
8 Touch this key to move the pattern down by about half of it's
finished height when sewing. (Refer to page 92.)
9 Touch this key to cancel your entry.
0 An advice screen will appear if you touch this key while
sewing. (Refer to page 39.)
A Touch this key to confirm your entry. (Refer to 94.)
3. Touch the pattern that you would like to use. The pattern
you touch will then be selected for use.
* If you select the wrong pattern by mistake, touch the
"CLEAR" key to clear the pattern selection.
* Up to 70 different patterns can be combined into a single
pattern.
" key.
87