Automatic Thread Cutting; Cancelling Programmed Automatic Thread Cutting - Brother PC-8200 User Manual

AUTOMATIC THREAD CUTTING

The thread can be cut automatically.
START
STOP

Cancelling programmed automatic thread cutting

36
If you set programmed automatic thread cutting
prior to sewing, the machine will automatically
trim the thread when the pattern has been
completed. (Reinforcement stitches are used at
the start and finish of the pattern.)
1. Select the stitch pattern.
2. Touch the automatic thread cutting key.
*
*
3. Press the "START/STOP" button. A
4. When sewing is completed, press the
1 Automatically trims the thread and stops.
*
1
Touching the automatic thread cutting key again
turns off the automatic thread cutting function.
Automatic thread cutting and the automatic
reinforcement stitch must be used together.
Automatic thread cutting is convenient for use
on buttonholes, bar tacking and other areas.
reinforcement stitch will be sewn before
sewing starts.
"REVERSE STITCH" button to sew a
reinforcement stitch and trim the thread.
Fabric should be placed 3 to 4 stitch lengths
behind the presser foot before sewing the
reinforcement stitch.