Setting The Bobbin - Brother PC-8200 User Manual

Setting the bobbin

1
1
1
1. Slide open the bobbin cover.
1 Bobbin cover
2 Bobbin cover release button
2
2. Insert the bobbin into the shuttle with the thread direction as
noted in the diagram.
3. Guide the thread end through the slit, then pull the thread
toward you to cut off any excess thread.
1 Built-in thread cutter
4. Close the bobbin cover by placing the left end in place and
pressing down lightly on the right end so that it snaps into
place.
2 * Sewing can begin without pulling out the bobbin thread.
17