Bobbin Winding / Bobbin Thread Setting; Winding The Bobbin And Setting The Bobbin Thread - Brother PC-8200 User Manual

BOBBIN WINDING / BOBBIN THREAD SETTING

Winding the bobbin and setting the bobbin thread

7
9
3
1 2
2 1
3
2
6
1. Connect the machine to the power supply and turn on the
main power.
2. Set the thread spool. The thread end should come from the
bottom front of the spool. The spool cap closest to the
thread spool size should be used to hold the spool securely
on the spool pin.
1 Spool cap
2 Spool
3 Spool pin
* The spool cap should be pushed on as far as it will go.
Note
If using a fine thread such as cross wound thread, slightly
separate the spool cap (small) from the thread on the spool
before using.
1 Cross wound thread
2 Spool cap (small)
3. Guide the thread through the machine and the thread guide
for bobbin winding as marked by the dotted line.
4, 8
5
1
15