Brother PC-8200 User Manual page 8

1
2
I
2
1
III
2 A
3
4
5
6
6
3
4
II
1
J
1
9
0
7 8
A. MAIN POWER SWITCH AND CONNECTORS
1 Card slot
Slot for memory card insertion.
2 Main power switch
Use to turn on/off the main power.
3 Controller jack
Insert for foot controller operation.
4 Power cord
Use to connect machine to power supply.
CAUTION
– When leaving the sewing machine
unattended, the main switch of the
machine must be switched off or the plug
must be removed from the socket-outlet.
– When servicing the sewing machine, or
when removing covers or changing bulbs,
the machine or the electrical set must be
unplugged.
– For U.S.A. only
This appliance has a polarized plug (one
blade wider than the other). To reduce the
risk of electric shock, this plug is intended
to fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician to install the
proper outlet. Do not modify the plug in
any way.
B. FLAT BED ATTACHMENT WITH
ACCESSORY COMPARTMENT
I Tilt the lid of the accessory compartment
toward you to open.
II Each presser foot has a symbol.
1 Presser foot symbol
III ACCESSORY LIST
The location of each accessory is shown in figure
III.
No. Part Name
1 Buttonhole foot "A"
2
Embroidery foot "Q"
3 Overcasting foot "G"
4
Monogramming foot "N"
5 Zipper foot "I"
6
Zigzag foot "J"
7 Blind stitch foot "R"
8
Seam ripper
9 Button fitting foot "M"
0
Bobbin
A Needle set
* Always use the plastic bobbin which is supplied
with machine or in accessory compartment.
* Always use BROTHER
recommended for this machine.
Part Code
X57789-101
XA2159-101
X51162-001
X53840-201
X59370-051
137748-101
X56409-001
X54243-001
130489-001
136492-101
X58358-001
accessories