Embroidering A Single Color Pattern When "Multi Color" Is Displayed; Changing The Stitch Density For Characters And Some Frame Patterns - Brother PC-8200 User Manual

Embroidering a single color pattern when "MULTI COLOR" is displayed

Changing the stitch density for characters and some frame patterns

1. Touch the "MULTI COLOR" key to change to the single
color mode. If the "START/STOP" button is pressed, a
single color of the pattern will be embroidered and then the
machine will stop automatically.
2. Trim any excess thread.
The stitch density adjustment is not available for all patterns.
Patterns other than the characters and some frame patterns are
not adjustable.
1. Touch the "TENSION" key.
2. The stitch density will become further apart (coarser) each
time the "
The stitch density will become closer together (finer) each
time the "
1 AUTO
2 Fine (stitches closer together)
3 Coarse (stitches farther apart)
* The normal setting is standard.
3
" key is touched.
" key is touched.
1 2
115