Other Included Accessories - Brother PC-8200 User Manual

OTHER INCLUDED ACCESSORIES

1 2
4 5
7 8
10 11
13 14
17
16 18
21
20 22
24
25 26
28 29
3
6
9
12
15
19
23
27
30
No. Part Name
1 Bobbin (3)
2 Seam ripper
3 Button fitting foot "M"
4 Scissors
5 Chalk pen
6 Cleaning brush
7 Eyelet punch
8 Screwdriver (Large)
9 Screwdriver (Small)
10 Spool cap (Small)
11 Spool cap (Large)
12 Extra spool pin*
13 Spool felt
14 Disc-shaped screwdriver
15 Walking foot*
16 Side cutter
17 Embroidery set (Regular)
18 Embroidery frame (Regular)
19 Embroidery sheet (Regular)
20 Net*
21 Embroidery set (Large)
22 Embroidery frame (Large)
23 Embroidery sheet (Large)
24 Embroidery set (Small)
25 Embroidery frame (Small)
26 Embroidery sheet (Small)
27 Screw*
28 Foot controller
29 Embroidery unit
30 Hard case
* Use the same screw when installing both the
side cutter and the walking foot.
* If using special threads which wind quickly off
the thread spool, place a net on the spool
before using.
* If using the walking foot,
please refer
explanatory sheet which is
inserted in the instruction
book.
* The extra spool pin which is
provided as an accessory
should be attached to the
end of the bobbin winder
shaft during use.
Note (For U.S.A. only)
Foot controller: Model J2
This foot controller can be used for sewing
machine model PC-8200.
Part Code
U.S.A. Others
136492-101
X54243-001
130489-001
184783-001
184944-001
XA4527-001
135793-001
X55467-051
X55468-051
130013-003
130012-003
XA3336-051
X57045-001
XA2005-051
X80926-001
X80943-001
SA422 X80903-002
XA2171-001
XA2212-001
127610-000
SA423 X80902-002
XA2168-001
XA2209-001
SA421 X80904-102
XA2174-001
XA2215-101
132730-251
234522-001
—
XA1821-001
to the
7