Table of Contents
Advertisement
Embroidering
5
5
Example:
1. Select the desired pattern.
The order of sewing for each part will be displayed.
*
The color displayed below each pattern is for reference.
Some parts may not have a color displayed below them; you
can sew these parts with any color you like.
2. Thread the needle for the first color and pass it through
embroidery foot "Q". Hold this thread in your left hand while
leaving a certain amount of slack in the thread.
*
Be sure to raise the presser foot lever before threading the
needle.
3. Lower presser foot lever and start embroidering. After 5 to 6
stitches have been sewn, stop the sewing machine and cut
off any surplus thread from the end of the seam.
*
If you are using the embroidery unit, the foot controller
cannot be used at this time.
*
Sewing can start even if "
4. Start the sewing machine once more.
The part indicated by (1) in the illustration will be
embroidered and the sewing machine will then stop
automatically. Once embroidering is completed, the display
will automatically move to the left and the next color to be
embroidered will be displayed at the left edge of the screen.
" is being displayed.
113
- Quick Links:
- Principal Parts
Hide quick links:
Advertisement
Table of Contents
