Brother PC-8200 User Manual page 110

1
2
3
108
6
7
8
4 5
2. Touch the "
3. The memory card pattern selection screen will
be displayed. (The illustration at left shows
the Transportation card No.12 (SA312,
XA0275-001) (option).)
* If another screen is being displayed, touch the
"EMBROIDERY" key before touching the
" " key.
4. Select the desired pattern.
* If you touch the "RETURN" key, the previous
screen will be displayed.
1 Indicates the selected pattern.
2 This indicates the order of color changes. The
color displayed below each pattern is for
reference.
3 Touch this key to change the thread tension.
4 Touch this key if you would like to move the
sewing position. (Refer to page 116.)
5 Touch this key if the thread breaks during
sewing or if you would like to sew again from
the beginning. (Refer to page 121.)
6 Touch this key to return to the previous
screen (pattern selection screen).
7 This shows the amount of time required to
embroider the pattern and the total amount of
time remaining. It does not include the time
needed to change colors.
(The totals are calculated and displayed after
a pattern is selected.)
8 This shows the size of the pattern.
" key.