Table of Contents
Advertisement
2
Chapter
Embroidering Preparation
Follow the steps below to prepare the machine for
embroidery.
Step 2
Step 1
Step 5
Step 4
Step
Aim
#
1
Checking the
Use needle 75/11 for
needle
embroidery.
2
Embroidery unit
Attach the embroidery unit.
attachment
3
Bobbin thread
For the bobbin thread, wind
setup
embroidery bobbin thread and
set it in place.
4
Fabric
Attach a stabilizer material to
preparation
the fabric, and hoop it in the
embroidery frame.
5
Embroidery
Attach the embroidery frame
frame
to the embroidery unit.
attachment
6
Pattern selection Select an embroidery pattern. 30
7
Checking the
Check and adjust the size and
layout
position of the embroidery.
8
Embroidery
Set up embroidery thread
thread setup
according to the pattern.
EMBROIDERY
Step 8
Step 6, 7
Step 3
Action
Page
24
25
17
27
29
32
33
Attaching the embroidery unit
IMPORTANT
• Before attaching the embroidery unit, be sure
to turn off the machine. Otherwise, the
machine may be damaged.
• Keep your hands and other objects away from
the embroidery carriage and frame when they
are moving. Otherwise, damage or
malfunction may occur.
CAUTION
• Do not move the machine with the embroidery
unit in place. The embroidery unit may be
dropped and cause injury.
a
Turn off the machine.
b
Insert the embroidery unit connection into the
connection port until it snaps into place.
Note
• Make sure that there is no gap between the
embroidery unit and the machine, otherwise the
embroidery pattern may not be embroidered
correctly.
IMPORTANT
• Do not push on the carriage when attaching
the embroidery unit to the machine, otherwise
damage to the embroidery unit may result.
• Do not touch the connector in the embroidery
unit connection slot. The connector could be
damaged, and it may cause malfunctions.
• Do not lift up on the embroidery carriage, and
do not forcefully move it. It may cause
malfunctions.
Embroidering Preparation
25
2
Advertisement
Table of Contents
