Table of Contents
Advertisement
Sewing
Sewing reverse/reinforcement stitches
Reverse/reinforcement stitches are generally necessary at the
beginning and end of sewing. Depending on the selected
stitch, reverse or reinforcement stitches are sewn while
(Reverse/Reinforcement stitch button) is kept pressed. With
reinforcement stitches, 3 to 5 stitches are sewn at the same
place. With reverse stitches, the stitching is sewn in the
opposite direction.
Memo
• When any of the following stitches is selected,
pressing
(Reverse/Reinforcement stitch button)
will sew reverse stitches.
No.
1-01
Stitch
When any other stitch is selected, pressing
(Reverse/Reinforcement stitch button) will sew
reinforcement stitches.
a
1 Reverse stitch
2 Reinforcement stitch
3
(Reverse/Reinforcement stitch button)
Automatic reverse/reinforcement stitching
After selecting a stitch pattern, turn on the automatic reverse/
reinforcement stitching function before sewing, and the
machine will automatically sew reinforcement stitches (or
reverse stitches, depending on the stitch pattern) at the
beginning and end of sewing.
Select a stitch.
a
• For details on selecting a stitch, refer to "Basic
sewing" on page 31.
b
Touch
to set the automatic reverse/reinforcement
stitching function.
The key will display as
34
1-03
1-08
c
.
c
Set the needle in the start position and press the "Start/
Stop" button to start sewing.
1 Reverse stitches (or reinforcement stitches)
The machine will automatically sew reverse stitches
(or reinforcement stitches) and then continue sewing.
Memo
• You can pause or resume sewing by pressing
"Start/Stop" button while sewing.
d
Once you have reached the end of the stitching, press
(Reverse/Reinforcement stitch button).
1 Reverse stitches (or reinforcement stitches)
The machine will sew reverse stitches (or
reinforcement stitches) and stop.
Automatic thread cutting
The machine can be set to automatically cut the threads at the
end of the stitching. If automatic thread cutting is set,
automatic reverse/reinforcement stitching is also set.
If the machine is turned off, automatic thread cutting will be
turned off.
a
Turn on the machine.
b
Select a stitch.
• For details on selecting a stitch, refer to "Basic
sewing" on page 31.
c
Touch
on the screen.
You get
, and the machine is set for
automatic thread cutting and automatic reverse/
reinforcement stitching.
• To turn automatic thread cutting off, touch
d
Set the needle in the start position, and press the
"Start/Stop" button once.
Stitching will begin after reverse stitches (or
reinforcement stitches) are sewn automatically.
.
Advertisement
Table of Contents
