Table of Contents
Advertisement
Sewing
→ The stitch pattern turns continuous.
Automatic reverse/reinforcement stitching
After selecting a stitch pattern, turn on the automatic reverse/
reinforcement stitching function before sewing, and the
machine will automatically sew reinforcement stitches (or
reverse stitches, depending on the stitch pattern) at the
beginning and end of sewing.
a
Select a stitch.
• For details on selecting a stitch, refer to "Basic
sewing" on page 25.
b
Press
to set the automatic reverse/reinforcement
stitching function.
→ The key will display as
c
Set the fabric in the start position and begin sewing.
1 Reverse stitches (or reinforcement stitches)
→ The machine will automatically sew reverse stitches
(or reinforcement stitches) and then continue sewing.
d
Once you have reached the end of the stitching, press
(Reverse/Reinforcement stitch button).
1 Reverse stitches (or reinforcement stitches)
→ The machine will sew reverse stitches (or
reinforcement stitches) and stop.
28
.
Automatically cutting the thread
The machine can be set to automatically cut the threads at the
end of the stitching. This is called "programmed thread
cutting". If programmed thread cutting is set, automatic
reverse/reinforcement stitching is also set.
If the machine is turned off, programmed thread cutting will
be turned off.
a
Turn on the machine.
b
Select a stitch.
• For details on selecting a stitch, refer to "Basic
sewing" on page 25.
Press
on the screen.
c
→ You get
, and the machine is set for
programmed thread cutting and automatic reverse/
reinforcement stitching.
• To turn programmed thread cutting off, press
d
Set the fabric in place, and press the "Start/Stop"
button once.
→ Stitching will begin after reverse stitches (or
reinforcement stitches) are sewn automatically.
e
Once you have reached the end of the stitching, press
(Reverse/Reinforcement stitch button) once.
If stitching, such as buttonholes and bar tacking, that
includes reinforcement stitching has been selected, this
operation is unnecessary.
→ After the reverse stitching (or reinforcement stitching)
has been done, the machine stops, and the threads
are cut.
1
2
3
.
1 The point where the "Start/
Stop" button was pressed.
2 The point where
(Reverse/Reinforcement
stitch button) was pressed.
3 The threads are cut here.
Advertisement
Table of Contents
