Structural Concepts OASIS C33R User Manual page 9

LOAD LEVEL GUIDE & TEMPERATURE GUIDE - MODELS C(L)(H)R LOAD LEVEL GUIDE & TEMPERATURE GUIDE - MODEL B(T)(L)(H)R
LOAD LEVEL & TEMPERATURE GUIDE - MODEL B(T)(L)(H)R LOAD LEVEL & TEMPERATURE GUIDE - MODELS C(L)(H)R
>> FOLLOW THESE PRODUCT PLACEMENT GUIDELINES TO >> FOLLOW THESE PRODUCT PLACEMENT GUIDELINES TO
MAINTAIN DESIRED PRODUCT TEMPERATURES. MAINTAIN DESIRED PRODUCT TEMPERATURES.
>> FRONT TO REAR PRODUCT TEMPS ARE ESTIMATES ONLY. >> FRONT TO REAR PRODUCT TEMPS ARE ESTIMATES ONLY.
>> NOTES CORRESPOND WITH ILLUSTRATIONS SHOWN. >> NOTES CORRESPOND WITH ILLUSTRATIONS SHOWN.
1. ALLOW AT LEAST 1" SPACE BETWEEN PRODUCT AND
1. AT TOP SHELF, KEEP PRODUCT BELOW THERMOMETER
ITS SHELF ABOVE.
(THAT IS ATTACHED TO REAR PERFORATED PLENUM).
2. AT CASE REAR, ALLOW AT LEAST 1" SPACE BETWEEN
PACKAGED
PRODUCT
ILLUSTRATION
MODEL C33R SHOWN ABOVE. CASE IS PARTIALLY DISASSEMBLED, CROSS SECTIONED
MODEL B37R SHOWN ABOVE. CASE IS PARTIALLY DISASSEMBLED, CROSS-SECTIONED
AND PACKAGED PRODUCT LADEN FOR ILLUSTRATIVE PURPOSES ONLY.
2. ALLOW AT LEAST 1" SPACE BETWEEN PRODUCT AND ITS PRODUCT AND REAR PERFORATED PLENUM.
3. DO NOT BLOCK 1 1/4" AIR RETURN OPENING WITH PRODUCT. SHELF ABOVE.
3. AT CASE REAR, ALLOW AT LEAST 1" SPACE BETWEEN
>> IF YOU ARE UNABLE TO MAINTAIN DESIRED PRODUCT
PRODUCT AND REAR PERFORATED PLENUM.
TEMPERATURES, SEE TROUBLESHOOTING SECTION IN MANUAL.
4. DO NOT BLOCK 1 1/4" AIR RETURN OPENING WITH PRODUCT.
>> IF YOU ARE UNABLE TO MAINTAIN DESIRED PRODUCT
TEMPERATURES, SEE TROUBLESHOOTING SECTION IN MANUAL.
PRODUCT
37 °F TO 41 °F
TEMPERATURE
PRODUCT AT
RANGE SHOWN
CASE FRONT
AT RIGHT.
1
1
PRODUCT
TEMPERATURE
RANGE SHOWN
2
AT RIGHT.
2
37 °F TO 41 °F
PRODUCT AT
CASE FRONT
HEADER
1
3
4
PACKAGED
PRODUCT
ILLUSTRATION
9
33 °F To 37 °F
PRODUCT AT
CASE REAR
33 °F To 37 °F
PRODUCT AT
CASE REAR
2
3