Structural Concepts OASIS C33R User Manual page 5

OVERVIEW / TYPE / COMPLIANCE / WARNINGS / PRECAUTIONS / WIRING / PLUGS - PAGE 3 of 3
PRECAUTIONS
•
This sheet contains important precautions to prevent
damage to unit or merchandise. Please read carefully!
•
See previous page for specifics on OVERVIEW, TYPE,
COMPLIANCE and WARNINGS.
•
Do not use mechanical devices or other means to
accelerate the defrosting process, other than those
recommended by the manufacturer
•
Only factory OEM replacement parts may be used on
appliances using flammable refrigerants.
•
Risk of electric shock. If the SUPPLY CORD is
damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons with factory
OEM replacement parts only.
CAUTION
WARNING
Do not use means to accelerate the defrosting process or to clean, other than those recommend-
ed by the manufacturer.
The appliance shall be stored in a room without continuously operating ignition sources (for ex-
ample: open flames, an operating gas appliance or an operating electric heater.)
Do not pierce or burn.
Be aware that refrigerants may not contain an odor.
CAUTION! LAMP REPLACEMENT GUIDELINES
LED lamps reflect specific size, shape and design.
Any replacements must meet factory specifications, resist breakage
and reflect similar appearance as lamps from factory.
CAUTION! CHECK CONDENSATE PAN, POSITION & CONNECTIONS!
Water on flooring can cause extensive damage!
• Before powering up case, check that condensate pan is positioned directly
under case's condensate drain.
• Also, check that there are NO LOOSE CONNECTIONS, including overflow
condensate pan and its power cord plug (if part of the condensate package).
CAUTION! DO NOT RELY ON THERMOMETERS OR
THERMOSTATS FOR PRODUCT (FOOD) TEMPERATURES.
• Thermometers & thermostats reflect air temperatures ONLY.
• For ACTUAL product (food) temperatures, use a calibrated food
probe thermometers ONLY.
• For accurate readings, DO NOT use infrared food thermometers.
WIRING DIAGRAM FORMAT & LOCATION
•
Each case has its own wiring diagram folded and in its own
packet.
•
Wiring diagram may be near ballast box, field wiring box,
raceway cover, or other related location.
5