Axis 2N IP Verso Installation Manual page 282

Door Opening (Switch Activation) by Biometric Reader
A biometric reader helps authenticate human fingerprints for control and management
of access and third party devices. Refer to Directory / Users for how to load a
fingerprint into a user profile.
Procedure:
Apply your finger to the reader scanning area.
Reader authentication light signalling:
Green – the fingerprint has been recognised successfully.
Green flashes to red – the fingerprint has been recognised but access is
denied. Check the user time profile setting state and multiple
authentication setting. Access can also be blocked by a previous tamper
switch blocking.
Red – the fingerprint has not been recognised .
Note
A higher moisture may deteriorate finger papillary line scanning. You are
advised to dry your finger and the reader scanning surface for successful
authentication.
Profile Activation/Deactivation
Activate/deactivate a profile using the numeric keypad in order to route calls directly
to the phone numbers tied with the profile; refer to the Intercom Configuration /
Directory / Time Profiles subsection of Configuration Manual subsection for details.
Procedure:
Enter the profile activating/deactivating numerical code using the numeric
keypad and press
A valid code is signalled by the
An invalid code or interruption longer than as defined in Timeout for Entering
Numbers is signalled by the
2N TELEKOMUNIKACE a.s., www.2n.cz
for confirmation.
or
sound.
sound according to the code type.
282/302