Bluetooth Reader; I/O - Axis 2N IP Verso Installation Manual

Note
A higher moisture may deteriorate finger papillary line scanning. You are
advised to dry your finger and the reader scanning surface for successful
authentication.

Bluetooth Reader

The Bluetooth reader (
elements and helps authenticate and subsequently open doors using Android
and iOS based smartphones via the Bluetooth protocol 4.0 as RFID card
replacement. Install the
Appstore to m
phones with Android OS 4.4 and higher and iOS 9 and higher.
The module contains two
The two connectors are fully interchangeable and can be used both as inputs
from the main unit or outputs to other modules.
If this module is the last one on the bus, one of the connectors remains
unconnected.
The package includes a 220 mm long interconnecting cable.
The module uses the 2.4 GHz frequency.
IDs from the following smart phones can be read:
Android 4.4 and higher
iPhone 4S and higher

I/O

The I/O (Part No. 9155034) is one of the
for extending the number of inputs and outputs.
The module contains two
These two connectors are fully interchangeable and can be used both as inputs
from the main unit and outputs to other modules.
If this module is the last one on the bus, one of the connectors remains
unconnected.
The module package includes an 80 mm long interconnecting cable.
The inputs / outputs are addressed as follows: <module_name>.<input
2N TELEKOMUNIKACE a.s., www.2n.cz
Part No. 9155046
®
2N Mobile Key
ake authentication work properly. The application requires
®
2N IP Verso
with iOS 8 and higher
2N IP Verso
®
2N IP Verso
) is one of the 2N
application from
bus connectors.
intercom elements and is used
®
bus connectors.
®
IP Verso intercom
Google Play and
262/302