Configuration - Axis 2N IP Verso Installation Manual

3.1 Configuration

®
Configure 2N IP Verso
Launch your internet browser (Internet Explorer, Firefox, etc.).
Enter the IP address of your intercom (
Log in using the username
You have to know your intercom IP address to log in to the integrated web server.
Upon purchase, 2N
IP address automatically if there is a properly configured DHCP server in the LAN. If
no DHCP is available, operate
Configuration Manual
If your device remains inaccessible (you have forgotten the IP address, the network
configuration has changed, etc.), you can change the network configuration using the
device buttons.
IP Address Retrieval
Take the following steps to retrieve the
Connect (or, if connected, disconnect and reconnect)
supply.
Wait for the second sound signal
Press the quick dial button on the main unit 5 times.
®
2N IP Verso
If the address is 0.0.0.0, it means that the intercom has not obtained the IP
address from the DHCP server.
2N TELEKOMUNIKACE a.s., www.2n.cz
using your PC with any internet browser:
Admin
®
IP Verso is set to the dynamic IP address mode – it retrieves the
®
2N IP Verso
®
for the 2N IP Verso
will read its IP address.
http://192.168.1.100/
and password 2n .
in the static IP address mode. Refer to the
configuration details.
®
2N IP Verso IP address:
.
, e.g.).
®
2N IP Verso to the power
277/302