Axis 2N IP Verso Installation Manual page 281

Calling to User-Defined Phone Number
If the Telephone function enabled
Keypad subsection of Configuration Manual) parameter is selected, you can dial a user-
defined phone number using the
Procedure:
Press .
1.
You will hear a continuous tone from the speaker.
2.
Enter the phone number via the numeric keypad and press
3.
your dialling.
You can also press the
4.
Function During Call
/ Keypad subsection of Configuration Manual.
Incoming Call Answering/Rejecting
If the automatic incoming call answering function is disabled (refer to the Intercom
Configuration / Services / Phone / Calls subsection of Configuration Manual), the
incoming call to 2N
and to reject the call.
Door Opening (Switch Activation) by Code
®
2N IP Verso is equipped with a door unlocking switch. Enter the valid code (refer to
the Intercom Configuration / Hardware / Switches subsection of Configuration
Manual) using the numeric keypad to activate this switch.
Procedure:
Enter the switch activating numerical code using the numeric keypad and press
for confirmation.
A valid code is notified visually and by a continuous switch activation tone or a
predefined unlocking user sound. An invalid code or interruption longer than as
defined in Timeout for Entering Numbers is signalled by the
user sound.
2N TELEKOMUNIKACE a.s., www.2n.cz
(refer to the Intercom Configuration / Hardware /
®
2N IP Verso
button anytime to hang up if enabled so in the Button
parameter; refer to the Intercom Configuration / Hardware
®
IP Verso is signalled with loud ringing. Press
numeric keypad.
again to confirm
to answer the call
sound or a
281/302