Touch Keypad & Rfid Reader - Axis 2N IP Verso Installation Manual

Tip
To accelerate card reading, you are recommended to select the card
types used by the user in the module settings.
Touch keypad & RFID reader 125kHz, secured 13.56MHz, NFC
The touch keypad with a combined 125 kHz and secured 13.56 MHz card (Part No.
9155083 ) reader is one of the
/card access control, making user calls and/or other functions. The keypad surface is
very sensitive yet weatherproof at the same time.
NFC – a licensed function, for 2N
The module contains two
These two connectors are fully interchangeable and can be used either as inputs
from the basic unit or outputs to other modules.
If this module is the last one on the bus, one of the connectors remains
unconnected.
The module package includes a 220 mm long interconnecting cable.
The following RFID cards can be read:
EM4100, EM4102, HID
ISO14443A
Mifare Classic 1k & 4k, DESFire EV1, Mini, Plus S&X, SmartMX, Ultralight,
Ultralight C, SLE44R35, my-d move (SLE66Rxx), PayPass, Legic Advant
ISO14443B
Calypso, CEPAS, Moneo, SRI512, SRT512, SRI4K, SRIX4K, PicoPass, HID
iCLASS (also PACS ID from iCLASS SE, iCLASS SEOS)
Tip
To accelerate card reading, you are recommended to select the card
types used by the user in the module settings.
2N TELEKOMUNIKACE a.s., www.2n.cz
®
2N IP Verso intercom elements and is used for code
®
Mobile Key for Android only.
®
2N IP Verso bus connectors.
®
Proximity
260/302