Axis 2N IP Verso Installation Manual page 243

Modular ip intercom
Hide thumbs Also See for 2N IP Verso:
Table of Contents

Advertisement

Static IP Address Setting
Follow the instructions below to switch on the
Press and hold the REST button.
Wait until the red and green LEDs on the device come on simultaneously
(approx. 20 s).
Wait until the red LED goes off (approx. 5 s).
Release the RESET button.
The following network parameters will be set after restart:
IP address: 192.168.1.100
Network mask: 255.255.255.0
Default gateway: 192.168.1.1
Dynamic IP Address Setting
Follow the instructions below to switch on the
Press and hold the REST button.
Wait until the red and green LEDs on the device come on simultaneously
(approx. 20 s).
Wait until the red LED goes off (approx. 5 s).
Wait until the green LED goes off and the red LED comes on again (another 5 s).
Release the RESET button.
2N TELEKOMUNIKACE a.s., www.2n.cz
Static IP address
mode (DHCP OFF):
Dynamic IP address
mode (DCHP ON):
243/302

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2N IP Verso and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents