Yamaha M7CL Owner's Manual page 27

5
6
7
8
9
J
E BALANCE
Adjusts the left/right balance of the STEREO channel.
For MONO channels, this control indicates the send level to the MATRIX bus.
F SEL (Select)
Selects the channel for which you want to make settings. (You can specify L and R inde-
pendently.) This is linked with the STEREO/MONO MASTER section [SEL] keys on
the M7CL's panel.
G CUE
This button cue-monitors the signal of the STEREO/MONO channel. This is linked
with the STEREO/MONO MASTER section [CUE] keys on the M7CL's panel.
H ON
This switches the STEREO/MONO channel on/off. This is linked with the STEREO/
MONO MASTER section [ON] keys on the M7CL's panel.
The button is color-coded and indicates status as follows:
White: STEREO/MONO channel is on (normal mode).
Black: STEREO/MONO channel/Send is off.
Other colors: Send is on (SENDS ON FADER mode).
I Fader
Adjusts the output level of the STEREO/MONO channel. This is linked with the STE-
REO/MONO MASTER section faders of the M7CL's panel.
The current fader value is shown in the numeric box immediately below the fader.
The numbers and alphabetical letters at the right of the fader indicate the mute groups
to which that channel belongs, and show the Recall Safe and Mute Safe status of the
channel. (For the significance of the numbers and alphabetical letters, see ➥ p.21).
The fader is color-coded and indicates status as follows:
White: You can adjust the input level of the STEREO/MONO channel (nor-
mal mode).
Gray: STEREO/MONO channel is off.
Other colors: You can adjust the send level (SENDS ON FADER mode).
J
Channel number
This is the channel number (ST or M). You can double-click this number to open the
Selected Channel window for this channel. If you hold down the <Ctrl>(< >) key of
your computer keyboard and double-click this, the Selected Channel window will open
as an additional view.
27 M7CL V3 Editor Owner's Manual