Working With Sessions - Yamaha M7CL Owner's Manual

Working with Sessions

All of your console's mix settings in M7CL Editor, including Scene and library data, are called Sessions.
The following table describes how to handle Sessions.
Creating a new Session
Opening a previously saved Session
Saving the current Session
Saving the current Session with a new name
When you save a session in the window of an editor, the settings of only that editor will be saved in a file. Session files
saved by M7CL Editor have a filename extension of ".YSE". Files in which only the M7CL console data is saved (file-
name extension ".M7C") can also be handled, allowing you to use a USB storage device to exchange data with the
M7CL console.
If you save a Session in the Studio Manager window, all selected Editor settings are saved in a file with a file extension
of ".YSM."
With M7CL V3 Editor, you can also open files that have been saved on any version of M7CL console or
NOTE
Editor other than version 3 if the files feature the extension ".M7C" or ".YSE". However, once you save
these files on the M7CL V3 console or Editor, you will not be able to open them on the other version of
M7CL console or Editor.
If you use the M7CL-48ES console to open a session saved via the M7CL-32/48 console, or if you use the
NOTE
M7CL-32/48 console to open a session saved via the M7CL-48ES, the patch settings will change and the
same HA settings will be used as follows:
M7CL-32/48
INPUT 1-16
INPUT 17-32
INPUT 33-48
ST IN 1L-4R
SLOT1 IN 1-16
SLOT2 IN 1-16
SLOT3 IN 1-16
TALKBACK
OMNI OUT 1-16
No assignment
No assignment
SLOT1 OUT 1-16
SLOT2 OUT 1-16
SLOT3 OUT 1-16
2TR DIGITAL OUT
(*) The same HA settings will be used.
Choose [New Session] from the [File] menu.
Choose [Open Session] from the [File] menu.
Choose [Save Session] from the [File] menu.
Choose [Save Session As...] from the [File] menu.
M7CL-48ES
↔
( )
* ES IN 1-16
↔
( )
* ES IN 17-32
↔
( )
* ES IN 33-48
↔
( )
* OMNI IN 1-8
↔
( )
* SLOT1 IN 1-16
↔
( )
SLOT2 IN 1-16
*
↔
( )
SLOT3 IN 1-16
*
↔
TALKBACK
↔
ES OUT 1-16
↔
ES OUT 17-24
↔
OMNI OUT 1-8
↔
SLOT1 OUT 1-16
↔
SLOT2 OUT 1-16
↔
SLOT3 OUT 1-16
↔
2TR DIGITAL OUT
7 M7CL V3 Editor Owner's Manual