Yamaha M7CL Owner's Manual page 10

Undo/Redo Function
In M7CL Editor, you can cancel the latest operation (Undo) and also cancel the cancellation of the latest operation
(Redo). If you perform an Undo operation twice in a row, you can cancel the two most-recent operations. If you per-
form an Undo operation three times in a row, you can cancel the three most-recent operations. In this way, you can
cancel multiple recent operations.
The following table describes how to use the Undo/Redo function.
Undo
Choose [Undo] from the [Edit] menu.
Redo
Choose [Redo] from the [Edit] menu.
Please note, however, that after you perform one of the following operations, you cannot successfully undo or redo
any previous operation:
• Operations on the M7CL console
• Quitting Studio Manager
• Synchronizing with the M7CL console
• Session operations
You cannot Undo or Redo the following operations:
NOTE
• Edits in the Setup window
• Synchronization
• Opening and closing the windows
• Resizing or moving the windows
• Stage Box Data Conversion
There are certain other operations that cannot be undone, depending on the function.
For library or scene operations, Undo/Redo applies only to the single most recent operation. You cannot
NOTE
undo any operations prior to this. Undo/Redo in these windows is available only using the [UNDO] button
within the respective window. Even if you perform a scene recall from the Master window, you cannot use
a shortcut or menu operation to undo the recall.
10 M7CL V3 Editor Owner's Manual