Yamaha M7CL Owner's Manual page 64

EXTERNAL HA/EXT-ES HA page
The EXT-ES HA page features VIEW switch buttons. Use these buttons to select the virtual rack display
NOTE
for SB168-ES or for others (AD8HR). If only the SB168-ES is connected, select the virtual rack display for
SB168-ES.
1
A External HA name
This shows the model name and ID number of the currently connected external head amp device.
B
GAIN
This specifies the gain for each channel. The current value is shown in the box below.
C 48V
This switches the phantom power (+48V) on/off for each channel.
D HPF (High Pass Filter)
This switches the HPF on/off for each channel.
E
+48V MASTER
If an AD8HR is connected, this indicates the on/off status of the master phantom power supply.
F Slots/Channels
Here you can select the slots/channels to which the audio outputs of the external head amp device are connected.
On the M7CL-48ES, the EXT-ES HA assignment is fixed.
NONE SLOT2 9-16
SLOT1 1-8 SLOT3 1-8
SLOT1 9-16 SLOT3 9-16
SLOT2 1-8
2 3 4
64
5 6
M7CL V3 Editor Owner's Manual